Page 1 of 1

Yet another unnamed ship from De'vor Shipyards

Posted: Wed Nov 16, 2011 11:03 pm
by thenoobiebuilder
This is actually the first ship I've ever made from the outside in(starting with the wing), as I couldn't figure out which bits go on the inside for the life of me.
It is designed to be some sort of light patrol ship, with it's 152mm cannon and 12 Missile tubes as a primary armament and the other cannons(four high velocity 40mm cannons, two 105mm cannons) as defensive weaponry.

It is equipped with with two nano matrix units to allow to repair after battle(not insta-repair in the slightest).

I still haven't figured out how to get the thing balanced, but it is perfectly fine when I use it at 9 fps :roll:
SMscreen050.png
Name: Unnamed
HP: 300
Speed: 2.25
Turning: 0.75
AI Range: 750
Accel: 0.05
Description:
Number of sections: 34
Total HP: 8192.08
Number of weapons: 11
Number of modules: 8

Weapon List:
weapon|__newsprite707|0.01|15|3|120|1000|300|1800|0.20|1.50|405mm High Velo. Missiles|-1|5|60|2|45|0.24|2|1|1
weapon|__newsprite707|0.01|15|3|120|1000|300|1800|0.20|1.50|405mm High Velo. Missiles|-1|5|90|2|45|0.24|3|1|1
weapon|__newsprite707|0.01|15|3|120|1000|300|1800|0.20|1.50|405mm High Velo. Missiles|-1|5|60|2|45|0.24|2|1|1
weapon|__newsprite707|0.01|15|3|120|1000|300|1800|0.20|1.50|405mm High Velo. Missiles|-1|5|90|2|45|0.24|3|1|1
weapon|__newsprite708|85|4|8|5|25|80|600|10|6|40mm Pom-Pom|8454143|75|1|-1|-1|-1|-1|1|1
weapon|__newsprite709|75|25|20|90|200|400|1000|1|1|105mm Cannon|-1|18|1|0|12|10|180|1|1
weapon|__newsprite708|115|4|8|5|25|80|600|10|6|40mm Pom-Pom|8454143|75|1|-1|-1|-1|-1|1|1
weapon|__newsprite708|85|4|8|5|25|80|600|10|6|40mm Pom-Pom|8454143|75|1|-1|-1|-1|-1|1|1
weapon|__newsprite709|75|25|20|90|200|400|1000|1|1|105mm Cannon|-1|18|1|0|12|10|180|1|1
weapon|__newsprite708|115|4|8|5|25|80|600|10|6|40mm Pom-Pom|8454143|75|1|-1|-1|-1|-1|1|1
weapon|__newsprite710|75|1|1|90|800|800|1750|1|1|312mm Heavy Cannon|-1|60|1|150|0|0|16744448|1|1

Module List:
module|ThrusterEx|0.01|0.01|0.01|0|300||0.02|1|0|16777215|10|360|-1|-1
module|ThrusterEx|0.01|0.01|0.01|0|300||0|0.12|0.35|16777215|10|360|-1|-1
module|ThrusterEx|0.01|0.01|0.01|0|300||0.02|1|0|16777215|10|0|-1|-1
module|ThrusterEx|0.01|0.01|0.01|0|300||0|0.12|0.35|16777215|10|0|-1|-1
module|NanoMatrix|500|0.40|0.10|120|50||0.10|16777215|-1|-1|-1|-1|-1|-1
module|NanoMatrix|500|0.40|0.10|120|50||0.10|16777215|-1|-1|-1|-1|-1|-1
module|ThrusterEx|0.01|0.01|0.01|0|300||0|0.12|0.35|16777215|10|180|-1|-1
module|ThrusterEx|0.01|0.01|0.01|0|300||0|0.12|0.35|16777215|10|180|-1|-1

Re: Yet another unnamed ship from De'vor Shipyards

Posted: Fri Nov 18, 2011 10:16 am
by Doogie12
Its interesting but starting from the outside in has got to be the dumbest thing ever. Not only is it restricting, but it sends the parenting out of whack too. Just practice and quit trying to do these weird dumb things.

Re: Yet another unnamed ship from De'vor Shipyards

Posted: Sat Nov 19, 2011 12:46 am
by thenoobiebuilder
My problem was that I couldn't really get the design flow down, once I did however I did it (mostly) inside out.
(or at least from the top down.)

However, all pieces are parented correctly:
SMscreen052.png
Doogie12 wrote:Its interesting but starting from the outside in has got to be the dumbest thing ever. Not only is it restricting, but it sends the parenting out of whack too. Just practice and quit trying to do these weird dumb things.
Thank you for the advice though. I'll be sure to incorporate these idea into my next project :)